For Turbo200X Wiring Instructions Click Here

Turbo 200 Wiring Installation Instructions

17.5 MFD

17.5

EXAMPLE: To replace a 17.5
microfarad single value capacitor:

STEP 1: To obtain the 17.5 microfarad for the compressor (HERM), using two (2)
jumper
wires, (a) connect the 5 (4) + 2.5 (3.0), then (b) connect the 2.5 (3.0) + 10.
This will equal 17.5 microfarads.

STEP 2: Connect one of the
compressor wires to the 10 MFD terminal.

STEP 3: Connect the other wire from the compressor motor to the common (C).
[The
common is the center black terminal].