For Turbo200X Wiring Instructions Click Here

Turbo 200 Wiring Installation Instructions

27.5 MFD

27.5

EXAMPLE: To replace a 27.5
microfarad single value capacitor:

STEP 1: To achieve the 20.0 microfarad for the compressor (HERM), using one (1)
jumper wire, connect 2.5 (3) + 25.  This
will equal 27.5 microfarads.

STEP 2:  Connect one of the compressor wires to the 25
MFD terminal.

STEP 3: Connect the other wire from the compressor to the common terminal on
the Turbo.  [The common is the center
black terminal].