For Turbo200X Wiring Instructions Click Here

Turbo 200 Wiring Installation Instructions

35.0 MFD

35

EXAMPLE: To replace a 35.0 microfarad
single value capacitor:

STEP 1: To obtain the 35.0 microfarad for the compressor (HERM), using one (1)
jumper

wire connect the 10 + 25.  This will
equal 35 microfarads.

STEP 2: Connect one of the
compressor wires to the 25 MFD terminal.

STEP 3: Connect the other wire from the compressor motor to the common (C).
[The common is the center black terminal].