For Turbo200X Wiring Instructions Click Here

Turbo 200 Wiring Installation Instructions

50.0 MFD

50

EXAMPLE: To replace a 50.0
microfarad single value capacitor:

STEP 1: To obtain the 50.0 microfarad for the compressor (HERM), using two (2)
jumper

wires, (a) connect the 5 (6) + 25, then (b) connect the 25 + 20. This will
equal 50.0 microfarads.

STEP 2: Connect one of the
compressor wires to the 25 MFD terminal.

STEP 3: Connect the other wire from the compressor motor to the common (C).
[The
common is the center black terminal].